Search in Category
Accessories
Filter Your Search
Case Quantity
Item ID
Type
Browse Categories
Loading...
Accessories
Viewing Page 1 of 2
(11 results)
BEND SUPPORT 90 DEG 1/2in
Item #:
LGD800-305
Supplier #: 800-305
Tube Bend Support 90° – Used to hold flexible tubing in a 90? bend without a fitting elbow and creates a neat, professional appearance.
Supplier #: 800-305
Tube Bend Support 90° – Used to hold flexible tubing in a 90? bend without a fitting elbow and creates a neat, professional appearance.
TUBE BEND SUPPORT 90°
Item #:
LGD800-304
Supplier #: 800-304
Tube Bend Support 90° – Used to hold flexible tubing in a 90? bend without a fitting elbow and creates a neat, professional appearance.
Supplier #: 800-304
Tube Bend Support 90° – Used to hold flexible tubing in a 90? bend without a fitting elbow and creates a neat, professional appearance.
TUBE PROTECTION SLEEVE 12 - UP TO 1/2
Item #:
LGD800-313
Supplier #: 800-313
Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after tubing has been installed and before concrete pour.
Supplier #: 800-313
Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after tubing has been installed and before concrete pour.
HEAT TRANSFER PLATE - 1/2 PEX TUBING
Item #:
LGD800-364
Supplier #: 800-364
Extruded Aluminum Heat Transfer Plates – For use with 3/8” or 1/2” PEX tubing. Plates are 3-1/2” x 4’ long and pre-drilled for wood screws .
Supplier #: 800-364
Extruded Aluminum Heat Transfer Plates – For use with 3/8” or 1/2” PEX tubing. Plates are 3-1/2” x 4’ long and pre-drilled for wood screws .
TUBE HOLDER PIN - 100/PKG
Item #:
LGD800-349
Supplier #: 800-349
Tube Holder Pin - All tube sizes for QT-100, Qt-200 & QT-300, Sold in Bags of 100
Supplier #: 800-349
Tube Holder Pin - All tube sizes for QT-100, Qt-200 & QT-300, Sold in Bags of 100
TUBE PROTECTION SLEEVE 12
Item #:
LGD800-314
Supplier #: 800-314
Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after tubing has been installed and before concrete pour.
Supplier #: 800-314
Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after tubing has been installed and before concrete pour.
TUBE HOLDER PIN 1-1/2 LONG F/1 PANELS
Item #:
LGD800-345
Supplier #: 800-345
Tube Holder Pin (1-1/2” long) - For Panels 1” or Thicker, Sold in Bags of 100
Supplier #: 800-345
Tube Holder Pin (1-1/2” long) - For Panels 1” or Thicker, Sold in Bags of 100
BEND SUPPORT 90 DEG 1/2in
Item #:
LGD800-503
Supplier #: 800-503
Tube Bend Support 90° – Holds tube in a tight radius 90° bend without a fitting elbow and without fear of “kinking”
Supplier #: 800-503
Tube Bend Support 90° – Holds tube in a tight radius 90° bend without a fitting elbow and without fear of “kinking”
