ELEEB-NB-180-240, Electro Boiler,

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

• ASME and CSA/UL listed
• Vessel boasts a large 40-gallon capacity
• Outdoor reset
• Disconnect circuit breakers for each heating element
• Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
• Compact, can easily fit through service doors
• No minimum return water temperature required
• 5-year vessel warranty
• 0-10VDC terminal enabling control of boiler via building automation system, etc.
• Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

• Circuit breakers, each stage
• Manual reset hi-limit - 220° F
• Auto reset limit control - 210° F
• Low water cut-off with manual reset
• ASME pressure relief valve, 30 psi
• Pressure/temperature gauge
• Drain pipe
• 3” NPT inlet and outlet, with inspection opening
• Incoloy sheathed heating elements
• Built-in load management controls, vessel top screw-in
• Staging indicator lights, at contactor
• Main supply circuit lugs
• Safety door interlock and lockable door latch

Control Box includes:

• Contains all boiler controls and adjustments
• Bender fault monitor (optional)
• Manual reset low water cut-off
• Hi-limit reset button
• Temp Sensing & Alarm board
• T775R controller (optional)
• Alarm and alarm LED’s
• Sequencer up to 15 stages
• Progressive staging delay time