Electric Boilers

Midsize Series Boiler (EB-MX-**)

Our most deluxe model is designed for multiple temperature and zoning applications. This model has the ability to sense water temperature and maintain an accurate boiler temperature output by only energizing the electric elements for needed output (not full capacity). To learn more about this concept read WarmFlo. This model eliminates extra costs associated with relays, extra temperature controls, zone boxes, etc. Our more experienced installers use this boiler to avoid the extra cost of the above.

Our front panel temperature  knob allows you to simply dial in your desired output temperature and the TS will automatically adjust to meet your water temperature needs.  Available in 10-20 kW, single phase 240V.

Other Benefits

• Built-in temperature/pressure gauge
• High Mass/Low Mass element modulation
• Boiler status panel
• ASME/CSA US/Canada certification
• Complete front panel accessibility
• Dual Boiler option
• Load Management connection
• Super quiet operation
• 20-year element/vessel warranty

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

• ASME and CSA/UL listed
• Vessel boasts a large 40-gallon capacity
• Outdoor reset
• Disconnect circuit breakers for each heating element
• Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
• Compact, can easily fit through service doors
• No minimum return water temperature required
• 5-year vessel warranty
• 0-10VDC terminal enabling control of boiler via building automation system, etc.
• Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

• Circuit breakers, each stage
• Manual reset hi-limit - 220° F
• Auto reset limit control - 210° F
• Low water cut-off with manual reset
• ASME pressure relief valve, 30 psi
• Pressure/temperature gauge
• Drain pipe
• 3” NPT inlet and outlet, with inspection opening
• Incoloy sheathed heating elements
• Built-in load management controls, vessel top screw-in
• Staging indicator lights, at contactor
• Main supply circuit lugs
• Safety door interlock and lockable door latch

Control Box includes:

• Contains all boiler controls and adjustments
• Bender fault monitor (optional)
• Manual reset low water cut-off
• Hi-limit reset button
• Temp Sensing & Alarm board
• T775R controller (optional)
• Alarm and alarm LED’s
• Sequencer up to 15 stages
• Progressive staging delay time

TS Series Boiler (EB-CX-**)

Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.

Other Benefits

• Larger physical size than our standard TS series boiler
• ASME and CSA/UL listed
• Wall-mounted
• Vessel boasts a large 13-gallon capacity
• Outside temperature sensing
• TS series style cabinet
• Disconnect circuit breaker included

TS Series Boiler (EB-CX-**)

Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.

Other Benefits

• Larger physical size than our standard TS series boiler
• ASME and CSA/UL listed
• Wall-mounted
• Vessel boasts a large 13-gallon capacity
• Outside temperature sensing
• TS series style cabinet
• Disconnect circuit breaker included

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

• ASME and CSA/UL listed
• Vessel boasts a large 40-gallon capacity
• Outdoor reset
• Disconnect circuit breakers for each heating element
• Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
• Compact, can easily fit through service doors
• No minimum return water temperature required
• 5-year vessel warranty
• 0-10VDC terminal enabling control of boiler via building automation system, etc.
• Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

• Circuit breakers, each stage
• Manual reset hi-limit - 220° F
• Auto reset limit control - 210° F
• Low water cut-off with manual reset
• ASME pressure relief valve, 30 psi
• Pressure/temperature gauge
• Drain pipe
• 3” NPT inlet and outlet, with inspection opening
• Incoloy sheathed heating elements
• Built-in load management controls, vessel top screw-in
• Staging indicator lights, at contactor
• Main supply circuit lugs
• Safety door interlock and lockable door latch

Control Box includes:

• Contains all boiler controls and adjustments
• Bender fault monitor (optional)
• Manual reset low water cut-off
• Hi-limit reset button
• Temp Sensing & Alarm board
• T775R controller (optional)
• Alarm and alarm LED’s
• Sequencer up to 15 stages
• Progressive staging delay time

TS Series Boiler (EB-CX-**)

Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.

Other Benefits

• Larger physical size than our standard TS series boiler
• ASME and CSA/UL listed
• Wall-mounted
• Vessel boasts a large 13-gallon capacity
• Outside temperature sensing
• TS series style cabinet
• Disconnect circuit breaker included

TS Series Boiler (EB-CX-**)

Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.

Other Benefits

• Larger physical size than our standard TS series boiler
• ASME and CSA/UL listed
• Wall-mounted
• Vessel boasts a large 13-gallon capacity
• Outside temperature sensing
• TS series style cabinet
• Disconnect circuit breaker included

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

• ASME and CSA/UL listed
• Vessel boasts a large 40-gallon capacity
• Outdoor reset
• Disconnect circuit breakers for each heating element
• Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
• Compact, can easily fit through service doors
• No minimum return water temperature required
• 5-year vessel warranty
• 0-10VDC terminal enabling control of boiler via building automation system, etc.
• Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

• Circuit breakers, each stage
• Manual reset hi-limit - 220° F
• Auto reset limit control - 210° F
• Low water cut-off with manual reset
• ASME pressure relief valve, 30 psi
• Pressure/temperature gauge
• Drain pipe
• 3” NPT inlet and outlet, with inspection opening
• Incoloy sheathed heating elements
• Built-in load management controls, vessel top screw-in
• Staging indicator lights, at contactor
• Main supply circuit lugs
• Safety door interlock and lockable door latch

Control Box includes:

• Contains all boiler controls and adjustments
• Bender fault monitor (optional)
• Manual reset low water cut-off
• Hi-limit reset button
• Temp Sensing & Alarm board
• T775R controller (optional)
• Alarm and alarm LED’s
• Sequencer up to 15 stages
• Progressive staging delay time

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

• ASME and CSA/UL listed
• Vessel boasts a large 40-gallon capacity
• Outdoor reset
• Disconnect circuit breakers for each heating element
• Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
• Compact, can easily fit through service doors
• No minimum return water temperature required
• 5-year vessel warranty
• 0-10VDC terminal enabling control of boiler via building automation system, etc.
• Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

• Circuit breakers, each stage
• Manual reset hi-limit - 220° F
• Auto reset limit control - 210° F
• Low water cut-off with manual reset
• ASME pressure relief valve, 30 psi
• Pressure/temperature gauge
• Drain pipe
• 3” NPT inlet and outlet, with inspection opening
• Incoloy sheathed heating elements
• Built-in load management controls, vessel top screw-in
• Staging indicator lights, at contactor
• Main supply circuit lugs
• Safety door interlock and lockable door latch

Control Box includes:

• Contains all boiler controls and adjustments
• Bender fault monitor (optional)
• Manual reset low water cut-off
• Hi-limit reset button
• Temp Sensing & Alarm board
• T775R controller (optional)
• Alarm and alarm LED’s
• Sequencer up to 15 stages
• Progressive staging delay time

TS Series Boiler (EB-CX-**)

Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.

Other Benefits

• Larger physical size than our standard TS series boiler
• ASME and CSA/UL listed
• Wall-mounted
• Vessel boasts a large 13-gallon capacity
• Outside temperature sensing
• TS series style cabinet
• Disconnect circuit breaker included