Tekmar Controls

The Replacement Fuses Kit M3052 consist of a package of five 15 A 250 V (ac) fuses. These fuses are to replace damaged or blown fuses on various controls which use them.

For Further Information and up to date literature visit: Tekmar Documentation

The Replacement Fuses Kit M3053 consist of a package of five 2.5 A 250 V (ac) fuses. These fuses are to replace damaged or blown fuses on various controls which use them.

For Further Information and up to date literature visit: Tekmar Documentation

The O-Ring Kit M3056 is a seal replacement kit for the tekmar 3-Way and 4-Way Brass Mixing Valves from 3/4” thru to 1-1/4”. The kit includes a small o-ring, a medium o-ring (indicated with a white paint mark) and a large o-ring. All of the o-rings are lubricated with silicone grease. These o-rings are needed if a valve shaft is leaking or to reseal after opening up for maintenance.

For Further Information and up to date literature visit: Tekmar Documentation

The O-Ring Kit M3057 is a seal replacement kit for the tekmar 3-Way and 4-Way Brass Mixing Valves from 1-1/2” thru to 2”. The kit includes a small o-ring, a medium o-ring (indicated with a white paint mark) and a large o-ring. All of the o-rings are lubricated with silicone grease. These o-rings are needed if a valve shaft is leaking or to reseal after opening up for maintenance.

For Further Information and up to date literature visit: Tekmar Documentation

The Mixing Valve Adapter Kit M3061 allows mounting of a floating action actuator M3062 to tekmar cast iron mixing valves. It is compatible with tekmar valve models 016 through 026. The M3061 and M3062 combined together replace the discontinued Actuator Motor 010 and 011.

For Further Information and up to date literature visit: Tekmar Documentation

The DIN Snap Kit M9303 consists of a set of ten DIN Snaps with springs. These components allow mounting a tekmar control to a DIN rail.

For Further Information and up to date literature visit: Tekmar Documentation