Tekmar Controls

The 3-Way Brass Mixing Valve 713 is used to mix supply water from a hydronic source with water returning from a system. It is designed for use in either closed loop or open loop hydronic systems. This 3-way valve has standard female NPT threads, as well as a maximum leak through rate of 1% to allow for water expansion during temperature changes. The valve position can be manually set using the handle. An Actuating Motor 741 can be used to automatically operate the valve.

For Further Information and up to date literature visit: Tekmar Documentation

The 3-Way Brass Mixing Valve 714 is used to mix supply water from a hydronic source with water returning from a system. It is designed for use in either closed loop or open loop hydronic systems. This 3-way valve has standard female NPT threads, as well as a maximum leak through rate of 1% to allow for water expansion during temperature changes. The valve position can be manually set using the handle. An Actuating Motor 741 can be used to automatically operate the valve.

For Further Information and up to date literature visit: Tekmar Documentation

The 4-Way Brass Mixing Valve 720 is used to mix supply water from a hydronic source with water returning from a system. It is designed for use in either closed loop or open loop hydronic systems. This 4-way valve has standard female NPT threads, as well as a maximum leak through rate of 1% to allow for water expansion during temperature changes. The valve position can be manually set using the handle. An Actuating Motor 741 can be used to automatically operate the valve.

For Further Information and up to date literature visit: Tekmar Documentation

The 4-Way Brass Mixing Valve 721 is used to mix supply water from a hydronic source with water returning from a system. It is designed for use in either closed loop or open loop hydronic systems. This 4-way valve has standard female NPT threads, as well as a maximum leak through rate of 1% to allow for water expansion during temperature changes. The valve position can be manually set using the handle. An Actuating Motor 741 can be used to automatically operate the valve.

For Further Information and up to date literature visit: Tekmar Documentation

For Further Information and up to date literature visit: Tekmar Documentation

For Further Information and up to date literature visit: Tekmar Documentation

For Further Information and up to date literature visit: Tekmar Documentation

The Actuating Motor Handle Kit M3045 is a replacement kit for use with the Actuator Motor 741. The kit includes one hand wheel with red indicator stripe and one screw with screw adaptor. This kit would be needed if the original hand wheel for the 741 became lost or damaged.

For Further Information and up to date literature visit: Tekmar Documentation

The Mixing Valve Adapter Kit M3061 allows mounting of a floating action actuator M3062 to tekmar cast iron mixing valves. It is compatible with tekmar valve models 016 through 026. The M3061 and M3062 combined together replace the discontinued Actuator Motor 010 and 011.

For Further Information and up to date literature visit: Tekmar Documentation

The DIN Snap Kit M9303 consists of a set of ten DIN Snaps with springs. These components allow mounting a tekmar control to a DIN rail.

For Further Information and up to date literature visit: Tekmar Documentation